SDSHobby
DYNAM PROGRAM CARD
Product Name | Program Card |
-Brake on | brake is active |
-Brake off | non active brake |
-Default Voltage | Cut off is set to 0,9V per cell for NiXX,3,0V per cell |
-ESC:, Connect with ESC-set, -External power:, Connect external power(4-6V). You should connect, -Normal Motors:, for2,4,6pole motors.This timming gives maximum, -Out rnnners:, strongly recommended for outrunners, -Cut off type hard:, motor is fully off immediately after reaching cut, -Cut off type slow down:, motor turns off slowly by power reduction, -Throttle curve linear:, half throttle is equal as 60% of maximum RPM, -Throttle curve logarithm:, half throttle is equal as 80% of maximum,
the ECS with external power of 4-6V if the ESC ...SDSHobby
EXTRA EPP AEROBATICS RC MODEL ELECTRIC AIRPLANES ARF TYPE B
Wing span | 955mm |
Motor | 2834, 2212, 2217, 950-1100KV Brushless outrunner |
Specifications:, Requirements for Ready to Fly Set (need to buy separately):, Features:, The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious damage would not be caused by slight faulty operation.,
Length:945mm Wing area:15.2dm Weight:480g (without battery) ESC: 18-30A Battery: 3S ...SDSHobby
EXTRA EPP AEROBATICS RC MODEL ELECTRIC AIRPLANES ARF TYPE A
Wing span | 955mm |
Motor | 2834, 2212, 2217, 950-1100KV Brushless outrunner |
Specifications:, Requirements for Ready to Fly Set (need to buy separately):, Features:, The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious damage would not be caused by slight faulty operation.,
Length:945mm Wing area:15.2dm Weight:480g (without battery) ESC: 18-30A Battery: 3S ...SDSHobby
GT POWER FPV THREE CHANNELS VIDEO SWITCHER
Feature:, This product is suitable for FPV aircrafts with lots of camera, Specifications:, Radio Channel:, 3 –way switch or rotary switch, Input Channel:, channel 3 video, Output Channel:, channel 1 video, Video Resistance:, 75ohm, Weight:, 4g,
SDSHobby
DIY FUTABA/ JR TYPE 3 PIN SERVO BATTERY CONNECTOR/PLUG SET (FEMALE AND MALE)
Product Description:, :, M-PXFJ or J-PXFJ,
Widely used for servo and battery etc. Each type has ...SDSHobby
IMAX B6 1-6S DIGITAL MULTIFUNCTIONAL BALANCE CHARGER (OUTPUT 5W 1A) WITHOUT ADAPTOR
Specification:, Operating Voltage Range:, DC11-18, Max. Charging Power:, 50W, Max. Discharging Power:, 5W, Charging Current Range:, 0.1-5.0A, Discharging Current Range:, 0.1-1.0A, Current Drain for Balancing Li-Po:, 300mA/cell, Ni-Cd/Ni-MH Cells:, 1-15S, Li-ion/Fe/Polymer cell:, 1-6S, Lead Battery Voltage:, -20V, Product Feature:, Package Lists:,
V Microprocessor controlled Delta-peak sensitivity Individual cell balancing Li-ion, LiPo ...SDSHobby
UNIVERSAL U SHAPED SERVO PROTECTOR/HOLDER/ ROBOT HOLDER/ CAMERA HOLDER
Application:, This product is suitable for robot, servo and head laser., *Attention:, Servo,
NOT IncludedSDSHobby
SUPER GRIPPER FOR AURDUINO ROBOT/2-FREE DEGREE GRIPPER OF MECHANICAL ARM (WITH 2 MG995 SERVOS)
Product Description:, The mechanical arm is, Kindly Remark:, The mechanical arm contains two metal servos MG995 which can be electronically controlled for 180degree; separately realize the clamping movement and the arms swing up and down.,
parallel holding things, easy to catch the object. The clawface ...SDSHobby
SUPER ROBOT GRIPPER FOR AURDUINO ROBOT/2-FREE DEGREE GRIPPER OF MECHANICAL ARM (WITHOUT SERVO)
Product Description:, The mechanical arm is, Kindly Remark:, This product does not contain servos. And it delivers by commecial parts, users need to install by yourself., http://www.sdshobby.com/towerpro-mg995-11kg552g-analog-servo-high-speed-wmetal-gears-5t-futaba-for-rc-hobby-and-robot-p-967.html,
parallel holding things, easy to catch the object. The clawface ...SDSHobby
IFLIGHT GIMBAL BRUSHLESS MOTOR FOR GOPRO3 / RC MULTICOPTER
Weight | 35g |
Structure | 12N14P |
Wire Winds | 70T |
Product Description:, Not include the wire, KV Value: 80, Motor size:,
Suitable for GOPRO brushless gimbal Using machine coiling for good ...SDSHobby
CLOVER-LEAF ANTENNA FOR DJI FPV 5.8G 8CH WIRELESS TRANSMISSION AV LINK + 5.8G VIDEO LINK (TX+RX)
Product Description:, of connectors:, -For transmitter:, A1TX Inner bore 180degree, A2TX Inner bore 90degree, B1TX Internal pin 180degree, B2TX Internal pin 90degree, -For receiver:, A3RX Inner bore 180degree, A4RX Inner bore 90degree, B3RX Internal pin 180degree, B4RX Internal pin 90degree, Kindly Remark:, 1. Please choose suitable antenna according to your own transmitter and receiver.,
Special use super-light-hard plastic to better protect the antenna and ...SDSHobby
190MM MULTIFUNCTIONAL SHOCK-MITIGATING LANDING SKID FOR FPV AERIAL PHOTOGRAPHY FOR MULTICOPTER- BLACK
Net Weight | 277.5g |
Material of support rod | glass fiber |
Material of mount | aluminium alloy |
Height | 190mm |
Features:, This product is suitable for aerial photography multicopter of 450-550 levels., Specifications:, Pipe Diameter of cradle head holder: 8, Package Details:, 4 x Multifunctional glass fiber board,
It is equipped with damping structure of cradle head holder. ...SDSHobby
3 BLADES CNC BOAT L-PROPELLER FULLY SUBMERGED WITH DIA-A=M4, DIA-B=40MM, PITCH RATIO: 1.4
Dia-A | the aperture of propeller |
Dia-B | the diameter of the round when propeller rotating |
Pitch Ratio | 1.4 |
Material | Aluminum and CNC processed, Surface anodized processed, looks smooth and is not easy to rust |
Weight | 4.8g |
Specifications:, NOTE:, Product pictures for reference only.,
Left Rotating Fully SubmergedSDSHobby
3 BLADES CNC BOAT R-PROPELLER PARTIALLY SUBMERGED DIA-A=M4, DIA-B=38MM PITCH RATIO: 1.6
Dia-A | the hole diameter in propeller |
Dia-B | the diameter of the round when propeller rotating |
. Pitch Ratio | 1.6 |
6. Weight | 4.3g |
NOTE: Product pictures for reference only .Because the product are many types, unable to every product take pictures, but quality and processing are the same. The actual product parameters fit with the text description,
1. Dia-A=M4, Dia-B=38mm 3. Right Rotating 4. Partially Submerged 5. ...